|
|
|
Group: Moderators
Last Login: Yesterday @ 11:21:23 PM
Posts: 2,823,
Visits: 7,293
|
|
| First, I have tried to find this info online only to become confused as chemistry has a habit of doing to me and can not find anything definitive (pros/cons). Having only calcium hydroxide available to me, and feeling dang lucky to have that, I can not maintain calcium levels even though all of my top off is lime water. Which I make by using rain water at a pH of 7.0 in a 6 litre container which barely dissolves half a teaspoon of "kalk" powder, leaving a great deal of it settled out on the bottom. Doing it this way while not maintaining my calcium does slowly jack up my alkalinity to where I either have to stop adding lime water or flush the system with a NSW change. Sooo, lately I have been adding about 30ml of muriatic acid to the rain water which is then able to dissolve 3 teaspoons of calcium hydroxide and not only maintains my calcium but raises it, it also does not mess with my alkalinity level in any great manner as the straight water/powder combo does. In fact, it will over time lower the alkalinity level very slowly to where I can easily adjust it back up a bit by using a combo of sodium bicarbonate and sodium carbonate (1/2 ratio). Oh, and I quickly learned that if one does use such an acid in place of dissolved CO2, do so in a glass container as the reaction generates a great deal of heat and melted a potable water container I was using (1 litre plastic bottled water container). That or dilute the acid out with distilled water, and wear goggles and have no bare skin exposed, and yes I found that out in my own way, which is always the hard way... So.... Being somewhat skittish on doing so or continuing to do so, I thought I had better swallow my pride and ask if there is anything I should be concerned about. Having a gallon or two of the acid, and not wanting to make the two hour trip to the mall on another island, I also tried soaking my carbon in a diluted muriatic acid solution as I read that is what industry does to recycle the tons of carbon they use, am I just wasting my time and acid? Feeling very much the newbie, Chuck
___________________________________________________________ "My life is free now, my life is dear" - Black Sabbath
|
|
|
|
|
Group: Moderators
Last Login: 2 days ago @ 3:40:09 AM
Posts: 2,035,
Visits: 5,260
|
|
| First of all, chemistry is not my strong point. Perhaps someone else can chime in. Chris, you out there? Anyhow, I know some folks do something similar using white wine vinegar (aka acetic acid). I have never experimented with either method, though.
Steven Pro, yeah that is my real name.
|
|
|
|
|
Group: Forum Members
Last Login: Yesterday @ 6:40:28 AM
Posts: 777,
Visits: 3,827
|
|
is there no way to get CaCl or baking soda?
------------------------------------
Carl
"almost any obstacle can be overcome with information; information is truly the oxygen of understanding."
Anthony Calfo
Going Solar
|
|
|
|
|
Group: Moderators
Last Login: Yesterday @ 11:21:23 PM
Posts: 2,823,
Visits: 7,293
|
|
| Thanks Steven, I was also thinking along the lines of vinegar use but had hoped the muriatic would not be a source of carbon as the vinegar is. Just concerned about mucking around with bacterial levels as those who use vodka,sugar attempt to do, but outside of that concern I just want to ensure I am not creating some other compound/metal or something that will make me regret using acid. I am going to try and find calcium chloride as that will raise my calcium levels and not just maintain it. If not then I will have to go back to massive water changes as I really would rather not do something to my system without knowing all the possibles involved. Chuck
___________________________________________________________ "My life is free now, my life is dear" - Black Sabbath
|
|
|
|
|
Group: Moderators
Last Login: 2 days ago @ 3:40:09 AM
Posts: 2,035,
Visits: 5,260
|
|
Muriatic acid is another name for hydrochloric acid, no carbon there, just hydrogen and chloride.
Steven Pro, yeah that is my real name.
|
|
|
|
|
Group: Moderators
Last Login: Yesterday @ 11:21:23 PM
Posts: 2,823,
Visits: 7,293
|
|
Thanks, the carbon issue was a biggie for me and now just want to reassure myself that I am not creating some exotic compound/chemical by having the acid dissolve the calcium. Am crossing my fingers that it is similiar to what goes on with a calcium reactor. Have been doing so for two weeks now and can not see any negatives and it seems to be doing what I had hoped it would, but...as we all know, the unseen or long term possibles is what gives me the willys. As a precaution, I still add calcium hydroxide untill its at saturation and forms the familiar precipitation that settles out in the hopes that any metals or impurities drop out as well. Even so, where I would get the same precipitation with one teaspoon of powder, with the addition of a bit of acid, it now takes at least four teaspoons. Having my calcium levels in the system jump up instead of remaining at the same level seems to be a good indication as well. I'm just paranoid though... Chuck
___________________________________________________________ "My life is free now, my life is dear" - Black Sabbath
|
|
|
|
|
Group: Forum Members
Last Login: 6/11/2008 9:18:40 AM
Posts: 18,
Visits: 158
|
|
| to the best of my knowledge, mixing hydrocloric acid and limewater will give you calcium chloride (and more water).
|
|
|
|
|
Group: Moderators
Last Login: Yesterday @ 11:21:23 PM
Posts: 2,823,
Visits: 7,293
|
|
| Thanks, that would be a good thing then... Chuck
___________________________________________________________ "My life is free now, my life is dear" - Black Sabbath
|
|
|
|
|
Group: Forum Members
Last Login: 6/27/2008 6:31:38 PM
Posts: 223,
Visits: 335
|
|
| Chuck, Appologies on getting here a bit late. Kalkwasser shouldn't have the capacity to yield an imbalanc of calcium and alkalinity. What kinds of numbers are you seeing? Do realize that adding 0.5 mmol/l of kalk will raise alkalinity 1 meq/l and calcium ~20 ppm. Since you're using NSW, at 35 ppt you should have ~412 ppm calcium and 2.37 meq/l total alkalinity. If you raised TA by 1 meq/l with kalk to 3.37 meq/l you'd have 432 ppm calcium. With most calcium test kits, that is just getting to the point where you can resolve a difference. A difference of 1 meq/l alkalinity is readily measurable though. Using muriatic acid with Ca(OH)2 will ge you CaCl2 (and water) as mentioned. If you need a more potent supplement than what you can get from kalk (e.g., if calcium and alkalinity are chronically low) then making up some calcium chloride (which will also contain some OH- if you use excess Ca(OH)2 ) for calcium and using baking soda/baked baking soda for alkalinity should work fine. Chris
FSM ~ Touched by His noodly appendage ~
|
|
|
|
|
Group: Forum Members
Last Login: 6/27/2008 6:31:38 PM
Posts: 223,
Visits: 335
|
|
| | |